- Captures dust particles and removes odours and gases from your surroundings
- Captures 99.97% of the tiniest .1 micron particles
- Uses a combination of polypropylene and carbon as a medium to trap particles and remove odors and gases
The Blue Air 501 Smokestop Particle Filter captures 99.97 percent of 0.1 micron particles, including allergy-provoking pollen grains, dust mites, mold spores and pet dander or high concentrations of cigarette smoke and other irritating gases. One order includes a set of three filters.
The Blue Air 501 Smokestop Particle Filter is a replacement filter for the Blueair 501 Air Purifier and is specifically intended for those allergic to cigarette smoke and similar irritants.
Weighing only 5.4 pounds and with dimensions of 13.7-inches long, 8.9-inches wide, and 9.6-inches deep, the polypropylene, HEPA- standard Blue Air 501 Smokestop Particle Filter with activated carbon can be easily changed without tools.
A revolutionary combination of advanced air filter media and an encapsulated ion particle charging chamber makes it possible for the Blueair air purifier system to achieve better results than either mechanical or electrostatic technology alone. Our nontoxic polypropylene filter contains millions of ultra- thin fibers that trap tiny particles as they pass through the pleats. One of the least harmful plastics for human health and the environment, polypropylene works without outgassing or shedding irritating microscopic fibers into the air. It eliminates bacteria, viruses and mold naturally, without chemical additives also captures more dirt than competitive systems. And as used filters are discarded and decompose, the filter media converts into harmless carbon dioxide and water.
Particles a HEPA filter alone might miss are captured with an electrostatic charge. HEPASilent?technology moves particles through an enclosed ion chamber, which attaches a charge to the particle itself. Charged particles cling more easily to the filter media, resulting in higher filter efficiency overall. Because most electrostatic air cleaners charge the filter media itself, the charge dissipates over time and renders the filter less efficient. By constantly charging incoming particles, instead of the filter, HEPASilent?technology keeps on working effectively and reliably.
*Standard HEPA filters measure efficiency at 0.3 microns. A typical HEPA filter removes 99.97% of particles of the 0.3 micron size. HEPASilent technology removes 99.97% of particles at 0.1 micron on it's lowest speed.
**Efficiency is measured on level 1.
3 standard HEPASilent smokestop air filters
Replace every 6 months.
Easy maintenance: When the filters need to be replaced (twice yearly), just open the lid, lift out the old filters and drop the new ones in. No screws, hooks or tools and less than one minute of your time are required. That's all there is to it to make the air cleaner and your breathing easier.
|
